Tackling Tablet Sticking - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Tackling Tablet Sticking
Rob Blanchard and Clive Roberts discuss the issues surrounding tablet sticking and the collaboration of I Holland with Nottingham University to improve tabletting science, which was announced in March 2012

Pharmaceutical Technology Europe



Rob Blanchard
Earlier this year, I Holland and the UK's University of Nottingham launched a two-year Tabletting Science Anti-stick Research project. One particular issue that will be investigated is what makes formulations stick to tablet tooling surfaces, including why certain coatings resist sticking, whereas others do not. With sticking being an important issue facing tablet manufacturers, Pharmaceutical Technology Europe spoke to Rob Blanchard, Research and Development Manager at I Holland, and Clive Roberts, Chair of Pharmaceutical Nanotechnology at the UK's University of Nottingham and Director at the Nottingham Nanotechnology and Nanoscience Centre at the University of Nottingham, to find out more about the collaboration.

Q: What issues can tablet sticking cause during pharmaceutical manufacturing, and how well understood is this problem?


Clive Roberts
Sticking is a complex phenomenon created by different parameters such as Van der Waals forces, capillary action, electrostatics and the surface roughness of the tablet tooling, to name but a few. Sticking can reduce yields, double compression (causing damage to tablet press and tooling), and cause poor tablet appearance, inconsistent tablet dosage and inconsistent tablet hardness, as well as other production issues. Sticking should not be confused with picking, which can look very similar to sticking, but which can commonly be resolved by changing tablet design. In recent years, I Holland has seen increasing requests for assistance in solving sticking from both generics and pharmaceutical companies alike.

Q: How do manufacturers currently address the problem of tablet sticking? Has the issue influenced the development of any new tools and technologies?

A common way of reducing sticking is to slow the tablet press down, thus increasing the dwell time. However, this solution is unpopular with tablet manufacturers because it reduces productivity of the tablet press. As a consequence, tablet press manufacturers and tablet tooling manufacturers have introduced solutions to help the end-user reduce sticking issues in production. For instance, I Holland has developed a range of antistick coatings that have been successful in solving sticking, but the coating used should always be matched to the specific formulation. In the past we have worked in partnership with our customers to carry out trials using all the antistick coating solutions in order to match the correct coating with the formulation and environmental conditions. A potential issue with this method is the associated cost incurred in time and expense to find the correct solution.

Q: With a variety of ingredients used in manufacturing, it must be difficult to systematically benchmark sticking behaviour for each ingredient. Can you talk about how the new collaboration between I Holland and the University of Nottingham aims to tackle this issue?

This is an important question and is in fact also complicated by orientation effects because the same material (if crystalline) can present quite different surface properties (chemical and mechanical) depending on preferential orientation effects. However, whilst building a library of data will take time, the range of excipients used in most formulations is not actually so extensive with the same materials (albeit in slightly different forms) often being used, particularly, with the high percentage content of solid dosage forms. Of course, APIs will be different and we will deal with the ones known to cause the most problems first and attempt to cluster compounds that have similar properties. Ultimately, the intention is to have a model that can predict sticking to various punch surfaces not based upon complex analytical measurements, but on a limited set of parameters that may largely already be known.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
Which of the following business challenge poses the greatest threat to your company?
Building a sustainable pipeline of products
Attracting a skilled workforce
Obtaining/maintaining adequate financing
Regulatory compliance
Building a sustainable pipeline of products
25%
Attracting a skilled workforce
29%
Obtaining/maintaining adequate financing
11%
Regulatory compliance
36%
View Results
Eric Langer Outsourcing Outlook Eric LangerBiopharma Outsourcing Activities Update
Cynthia Challener, PhD Ingredients Insider Cynthia Challener, PhDAppropriate Process Design Critical for Commercial Manufacture of Highly Potent APIs
Jill Wechsler Regulatory Watch Jill Wechsler FDA and Manufacturers Seek a More Secure Drug Supply Chain
Sean Milmo European Regulatory WatcchSean MilmoQuality by Design?Bridging the Gap between Concept and Implementation
Medicare Payment Data Raises Questions About Drug Costs
FDA Wants You!
A New Strategy to Tackle Antibiotic Resistance
Drug-Diagnostic Development Stymied by Payer Concerns
Obama Administration Halts Attack on Medicare Drug Plans
Source: Pharmaceutical Technology Europe,
Click here