An Overview of NanoCluster Powder Formulation Technology - Pharmaceutical Technology

Latest Issue

Latest Issue
PharmTech Europe

An Overview of NanoCluster Powder Formulation Technology
The authors describe a technique designed to yield low-density powders with a tailored particle-size distribution over a broad range of respiratory flow rates.

Pharmaceutical Technology
Volume 10, Issue 34, pp. 72-78

The lung is an excellent target for the delivery of drugs that treat local and systemic disorders because of its large surface area, good vascularization, thin alveolar epithelium, and capacity for solute exchange. The surface area of the lung is between 80 and 140 m2 . In peripheral pulmonary regions, the thickness of the alveolar epithelium is only 0.1–0.2 Ám (1). In the deep lung (peripheral or alveolar region), the distance between the epithelial surface and the blood is 0.5–1.0 Ám, which is much less than in the bronchial regions, where the distance between the mucus surface and blood is 30–40 Ám (2). Thus, pharmaceuticals deposited in the peripheral region of the lung can be absorbed rapidly and are not subject to hepatic first-pass metabolic effects after their absorption.

The ability to consistently manufacture inhalation powders with customized particle size and aerodynamic properties is crucial to the advancement of effective medications that treat local pulmonary diseases, and to the delivery of systemic medications through the lung. To target deposition in various regions of the respiratory tract, including the deep lung, inhalation powders must have the appropriate particle size and aerodynamic characteristics, be therapeutically effective, be chemically and physically stable, and be compatible with current modes for pulmonary delivery. The ideal particle size for deposition into the deep lung is 1–3 Ám (3–5). Particles with diameters of 4–5 Ám typically deposit in the upper airways, regardless of whether they are dry particles or droplets, as nebulized formulations are (6, 7). For inhalation powders, particle size is not the only characteristic that guides deposition to a particular region of the lung. The mass median aerodynamic diameter (MMAD) has a greater influence on the deposition profile than particle size because it accounts for particle density and shape.

Current particle-size reduction technologies typically yield particles with MMADs in the range of 3–5 Ám. However, the ability to create particles in the 1–3-Ám range that target the peripheral lung provides opportunities to improve medications for diseases such as asthma and chronic obstructive pulmonary disease. Particle-size reduction techniques generally are categorized as milling from larger particles (i.e., top-down) or precipitation from solution (i.e., bottom-up).

Milling has been the traditional method for particle-size reduction. Various models such as ball mills, colloid mills, hammer mills, and jet or fluid-energy mills have been studied, but the majority of inhalation powders are prepared with jet mills. Jet milling has disadvantages that include the lack of control over parameters such as size, shape, morphology, and surface properties of the milled particles. In addition, the high energy input can promote chemical degradation and often damages the crystal surface, thus yielding highly charged and cohesive particles.

Precipitation techniques include spray drying, spray freeze-drying, supercritical-fluid extraction, and microcrystallization. Spray drying is a widely accepted pharmaceutical process that forces a fluid through a nozzle, thus generating a mist that is dried to produce a fine powder. Spray drying has been adapted to employ various nozzles that use ultrasound or air-jet shear to nebulize drug suspensions. Supercritical-fluid extraction uses a supercritical fluid, generally carbon dioxide, to extract a solvent from a drug emulsion or solution, thus leaving behind a suspension of drug particles. Both spray drying and supercritical-fluid extraction often use cosolvents to improve drying, require large amounts of excipients to stabilize the drug and powder properties, and require high shear rates that can denature proteins. The two processes typically have low yield efficiencies for particles smaller than 3 Ám. Generally, these techniques produce inhalation powders that are blended with excipients or a carrier such as lactose.

Spray drying generates particles of an appropriate size for pulmonary delivery (8). Recently, spray-dried porous nanoparticle-aggregate particles (PNAPs), which are composed of a shell of nanoparticles and excipients, have exhibited an aerodynamic size of about 2 Ám. Scientists have studied PNAPs for a range of applications from needle-free vaccine delivery to the delivery of antituberculosis compounds through the inhalation route (9, 10).


blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
| Weekly

What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Jim Miller Outsourcing Outlook Jim MillerOutside Looking In
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerAdvances in Large-Scale Heterocyclic Synthesis
Jill Wechsler Regulatory Watch Jill Wechsler New Era for Generic Drugs
Sean Milmo European Regulatory WatchSean MilmoTackling Drug Shortages
New Congress to Tackle Health Reform, Biomedical Innovation, Tax Policy
Combination Products Challenge Biopharma Manufacturers
Seven Steps to Solving Tabletting and Tooling ProblemsStep 1: Clean
Legislators Urge Added Incentives for Ebola Drug Development
FDA Reorganization to Promote Drug Quality
Source: Pharmaceutical Technology,
Click here