Continuous Processing: Moving with or against the Manufacturing Flow - Pharmaceutical Technology

Latest Issue

Latest Issue
PharmTech Europe

Continuous Processing: Moving with or against the Manufacturing Flow
Fueled by a need to reduce costs and improve efficiencies, continuous processing may be the next paradigm shift in pharmaceutical manufacturing.

Pharmaceutical Technology
Volume 9, Issue 32, pp. 5258

Continuous processing is taking root in the pharmaceutical industry. Faced with greater pressure to reduce manufacturing costs, the lure of reduced process variability, and a regulatory environment supportive of manufacturing modernization, companies are considering continuous processing in their short- and long-term strategies.

A regulatory framework

Although common in other process manufacturing industries (e.g., food and chemicals), continuous processing is at a nascent stage in the pharmaceutical industry, where batch manufacturing is the prevailing mode.

"The movement from batch to continuous processing may not be as extreme as it seems at first," says Moheb Nasr, director of the Office of New Drug Quality Assessment, Center for Drug Evaluation and Research at the US Food and Drug Administration and member of Pharmaceutical Technology's editorial advisory board. "Many current pharmaceutical operations such as roller compaction and tablet compression can be considered semicontinuous operations and readily could be converted to true continuous mode. These unit operations have a constant flow of material in and out (like a continuous process), but are typically run over a defined period of time or for a fixed amount of material (like a batch process). Other unit operations such as blending, drying, and tablet coating have traditionally been operated in batch mode and could require more development efforts to transition to continuous mode."

By its very nature, continuous processing lends itself to in-process monitoring and control and is compatible with FDA's process analytical technologies (PAT) initiative and the agency's overall move to a risk- and science-based approach to pharmaceutical manufacturing and quality-by-design principles. In its PAT guidance, FDA identified "facilitating continuous processing to improve efficiency and manage variability" such as through small-scale equipment that eliminates scale-up issues, as a way to improve quality, safety, and efficiency (1).

Current regulations do not distinguish between batch and continuous manufacturing. "A point of confusion is the word 'batch,' which can mean either the mode of manufacturing or the quantity of material being processed," says Nasr. The regulations specify (2):

A batch means a specific quantity of a drug or other material that is intended to have uniform character and quality, within specified acceptance limits, and is produced according to a single manufacturing order during the same cycle of manufacture.

"The definition of batch here refers to the quantity of material and does not specify the mode of manufacture," says Nasr. "Manufacturers should not be dissuaded from applying continuous processing based on the prevalence of the word 'batch' in the regulations."

A major difference, however, between batch and continuous processes is determination of product or intermediate uniformity. "In batch processes, uniformity is often determined by measuring or sampling at different spatial positions within equipment; in continuous processing, uniformity would likely be determined across time," explains Nasr. "A 'batch' would need to be defined by the manufacturer for continuous processing that is consistent with the regulatory definition under 21 CFR 210.3(b)," he says. These regulations deal with current good manufacturing practices (2). The European Medicines Agency (EMEA) does not distinguish between batch and continuous processing, according to members of EMEA's Inspections sector.

Pros and cons

Given a regulatory framework for continuous processing, the key question is whether it offers technical and economic benefits compared with batch manufacturing. On that point, there is mixed opinion.

"Selection of continuous processing over batch manufacturing is driven by two factors: economics and process control," explains Anthony J. Maddaluna, vice-president and team leader of Pfizer Global Manufacturing strategy and supply network transformation. "It is expected that a continuous process will use less equipment, sit in a smaller building footprint, use less labor, use less utilities, generate less waste, and hence, will be more economical. A general rule of thumb is that a well-designed continuous plant should cost about 40% less than a comparable batch plant," he says.


blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
| Weekly

FDASIA was signed into law two years ago. Where has the most progress been made in implementation?
Reducing drug shortages
Breakthrough designations
Protecting the supply chain
Expedited reviews of drug submissions
More stakeholder involvement
Reducing drug shortages
Breakthrough designations
Protecting the supply chain
Expedited reviews of drug submissions
More stakeholder involvement
View Results
Eric Langerr Outsourcing Outlook Eric LangerTargeting Different Off-Shore Destinations
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerAsymmetric Synthesis Continues to Advance
Jill Wechsler Regulatory Watch Jill Wechsler Data Integrity Key to GMP Compliance
Sean Milmo European Regulatory WatchSean MilmoExtending the Scope of Pharmacovigilance Comes at a Price
From Generics to Supergenerics
CMOs and the Track-and-Trace Race: Are You Engaged Yet?
Ebola Outbreak Raises Ethical Issues
Better Comms Means a Fitter Future for Pharma, Part 2: Realizing the Benefits of Unified Communications
Better Comms Means a Fitter Future for Pharma, Part 1: Challenges and Changes
Source: Pharmaceutical Technology,
Click here