Understanding The Requirements For Effective Nasal Drug Delivery - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Understanding The Requirements For Effective Nasal Drug Delivery


Pharmaceutical Technology Europe
Volume 22, Issue 9


(GLOW IMAGES/GETTY IMAGES)
Nasal sprays are widely used for locally acting preparations, such as decongestants and allergy treatments, as well as for the rapid delivery of systemic therapies, hormones and migraine treatments. In each case, the effectiveness of drug delivery depends on both the delivered dose and the size of the droplets produced by the spray pump during actuation. The latter influences both deposition and, potentially, bioavailability. In turn, droplet size derives from the characteristics of both the device and formulation, in combination, as recognised in the testing protocols.1–3 To achieve the desired performance of a product, developers may choose to manipulate the properties of the formulation or the design of the device, or both; however, developers require clear and relevant data on which to base their decisions.

Laser diffraction-based particle size analysis is a powerful tool for nasal spray characterisation primarily because it is fast enough to capture droplet size evolution in real time. This article examines its value, and describes studies that explore the effect of formulation viscosity on droplet size, as well as device characteristics, such as orifice diameter of the nasal actuator and spray pump mechanism. Such studies support the faster and more efficient development of nasal spray products.

The regulatory perspective

Regulatory guidance recommends that nasal sprays are tested as combined products (device and formulation together) to determine reproducible delivery.1–3 Achieving clinical efficacy and good product consistency relies on understanding and controlling the interactions between device and formulation, which together dictate performance. Invitro testing is specified for a range of variables, with droplet size being one of the most important parameters. Droplet size measurements are used to assess:

Quality — the consistency of performance; for example, over the lifetime of the product, from batch-to-batch, or after storage.

Safety — droplets of 10 Ám and below may pass through the nasal passages and penetrate into the lungs.3 Consequently, APIs in this fraction will enter the body by pulmonary absorption, rather than by the intended route. Quantifying the extent of this risk and assessing the associated clinical effect is essential.

Efficacy — droplet size influences the site of deposition within the nasal passages, which may affect bioavailability.

The FDA recommends droplet size measurement at several stages of the product life cycle, including: development/optimisation and preclinical/IND trials; stability, robustness and in vitro bioequivalence testing; and batch release.1,2 The European Medicines Evaluation Agency (EMA) sets out similar guidance for droplet sizing as part of product applications,3 although the extension to in vitro bioequivalence testing is not as clearly stated. Such testing allows developers to successfully optimise controllable parameters to meet performance targets and provides quality control for the manufactured product.

The two droplet sizing techniques for nasal spray testing highlighted by the regulators are cascade impaction and laser diffraction. Cascade impaction is a relatively time and labour-intensive technique that allows measurement of the amount of API in the sub -Ám aerodynamic fraction, which is important for assessing the potential for pulmonary absorption (as noted above). Laser diffraction, in contrast, is sufficiently rapid to provide real-time size measurement of the whole droplet rather than just the API. Because of this, laser diffraction is an excellent tool to use during the development cycle when the aim is to target a defined droplet size and obtain an early assessment of the percentage of droplets less than 10 Ám in size.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
FDASIA was signed into law two years ago. Where has the most progress been made in implementation?
Reducing drug shortages
Breakthrough designations
Protecting the supply chain
Expedited reviews of drug submissions
More stakeholder involvement
Reducing drug shortages
70%
Breakthrough designations
4%
Protecting the supply chain
17%
Expedited reviews of drug submissions
2%
More stakeholder involvement
7%
View Results
Eric Langerr Outsourcing Outlook Eric LangerRelationship-building at Top of Mind for Clients
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerRisk Reduction Top Driver for Biopharmaceutical Raw Material Development
Jill Wechsler Regulatory Watch Jill Wechsler Changes and Challenges for Generic Drugs
Faiz Kermaini Industry Insider Faiz KermainiNo Signs of a Slowdown in Mergers
CMOs and the Track-and-Trace Race: Are You Engaged Yet?
Ebola Outbreak Raises Ethical Issues
Better Comms Means a Fitter Future for Pharma, Part 2: Realizing the Benefits of Unified Communications
Better Comms Means a Fitter Future for Pharma, Part 1: Challenges and Changes
Sandoz Wins Biosimilar Filing Race
Source: Pharmaceutical Technology Europe,
Click here