June 2010 Editor's Picks: Products from BinMaster and Kason - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

June 2010 Editor's Picks: Products from BinMaster and Kason

Equipment and Processing Report

Featured products from Pharmaceutical Technology's monthly newsletter, Equipment & Processing Report

product BinMaster Level Controls
Probes enable delayed notification

The PROCAP I and PROCAP II capacitance probes from BinMaster Level Controls (Lincoln, NE) perform high- and low-level detection in bins, tanks, and hoppers. The probes can send immediate alerts when they detect a covered state (e.g., to shut off a filling process). Users also can program the probes to send alerts after a delay of as long as 30 s. Operators can apply the immediate and delayed alerts to covered and uncovered conditions.

The PROCAP I and PROCAP II capacitance probes operate at a frequency of 6 KHz and do not interfere with two-way radios or other equipment operating in the radio spectrum. A light-emitting diode indicates each sensor’s status. The units’ PRO-Shield feature compensates for material buildup on the sensing probes and is designed to ensure accurate level detection in dusty, sticky, or clinging materials. The devices are appropriate for various solid, liquid, and slurry materials.


productKason
Sanitary sifter provides easy disassembly

Kason’s (Millburn, NJ) Ultra Sanitary Mini Centri-Sifter product performs fine-mesh screening to a particle size of 25 µm. The sifter has a small footprint and is suitable for difficult-to-screen powders. An operator can remove the device's cylindrical screen–spout assembly and feed screw–paddle assembly by adjusting three hand knobs. The screening chamber can be removed by adjusting one bolt, and the entire unit can be disassembled for sanitization in less than three minutes.

The sifter discharges correctly sized material through an outlet into a storage vessel or processing equipment. Oversized particles exit through the end of the screen cylinder and fall through a second outlet to be discarded or reprocessed. The machine’s dust-tight, sanitary design complies with current good manufacturing practice, according to Henry Alamzad, Kason’s president. Operators can sterilize the sifter manually or in an autoclave. Cylindrical screens are available in woven nylon, monofilament, wire mesh stainless steel, perforated plate, and stainless steel wedge wire.

ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
Which of the following business challenge poses the greatest threat to your company?
Building a sustainable pipeline of products
Attracting a skilled workforce
Obtaining/maintaining adequate financing
Regulatory compliance
Building a sustainable pipeline of products
24%
Attracting a skilled workforce
30%
Obtaining/maintaining adequate financing
15%
Regulatory compliance
30%
View Results
Eric Langer Outsourcing Outlook Eric LangerBiopharma Outsourcing Activities Update
Cynthia Challener, PhD Ingredients Insider Cynthia Challener, PhDAppropriate Process Design Critical for Commercial Manufacture of Highly Potent APIs
Jill Wechsler Regulatory Watch Jill Wechsler FDA and Manufacturers Seek a More Secure Drug Supply Chain
Sean Milmo European Regulatory WatcchSean MilmoQuality by Design?Bridging the Gap between Concept and Implementation
Medicare Payment Data Raises Questions About Drug Costs
FDA Wants You!
A New Strategy to Tackle Antibiotic Resistance
Drug-Diagnostic Development Stymied by Payer Concerns
Obama Administration Halts Attack on Medicare Drug Plans
Source: Equipment and Processing Report,
Click here