Achieving Aseptic Drying With Spray Drying Technologies - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Achieving Aseptic Drying With Spray Drying Technologies
Henrik Schwartzbach, senior process technologist at GEA Niro, explins why spray drying is seeing increased uptake in the pharma industry.


Pharmaceutical Technology Europe
Volume 23, Issue 9

How is spray drying being used in the pharma industry?

Spray drying has played a significant role in the pharmaceutical industry for many years in the drying of excipients, APIs and final drug formulations. To a large extent, interest in spray drying has been fuelled by the fact that it is in an 'enabling technology'; for example, using spray drying to produce amorphous solid dispersions can improve the performance of poorly soluble APIs. Also, processes that are based on organic solvents are ideally suited for spray drying and produce results that generally surpass those of alternative technologies.

Interest has also spread to other areas where spray drying may be more economical or where the particle engineering possibilities are better than the traditional methods of production. Examples could be to obtain controlled release or to produce very fine powders for inhalation.

When designed for aseptic production, spray drying can be used to produce aseptic products, such as vaccines, antibiotics and other parenterals.

Spray drying is a simple process where droplets/particles are dried while suspended in a drying gas. This turns a liquid formulation into a dry powder in a single, continuous process. The basic spray drying process has three essential steps:

  • Atomisation, where the droplets are formed.
  • Drying gas and droplet contact, where the liquid is evaporated.
  • Powder recovery, where the dried particles are separated from the drying gas stream.

The spray dryer is a suspended particle dryer. Drying particles while suspended requires drying to be very fast and droplet trajectories must also be kept away from the drying chamber wall for as long as possible

Fast drying is achieved by effective and uniform atomisation of the liquid, which creates a very large surface area and by ensuring effective mixing of the droplets with the drying gas

Because of the relatively short residence time (a function of the size of the drying chamber and the flow pattern of the drying gas), the process requires small droplets in order to work properly. The smaller the drying chamber, the smaller the maximum particle size that can be successfully dried. Hence, the spray drying process is most limited at the small scale, where as scale-up provides more opportunities and improved process robustness.

The fast drying, the short residence time and predictable temperature exposure—caused by the effective mixing of the droplets with the drying gas—results in a lenient drying process that can be adjusted for a range of process conditions, including the drying of heat sensitive materials such as live vaccines and complex proteins. Just as importantly, spray drying is a highly reproducible process that can be predictably scaled up to nearly any production size.

Spray drying also offers a range of particle engineering possibilities. By altering the process parameters (and/or spray dryer configuration), spray drying can produce complex particulates that meet exact powder properties in terms of particle size and shape, bulk density, dispersability, polymorphism, flow properties and so on. A good example is the manufacture of a polymer-stabilised, amorphous solid dispersion of an API for direct compression into tablets without an intermediate granulation or mixing stage. In this case, the process conditions are chosen to produce a homogenous, free-flowing and non-dusty powder of good density from a liquid formulation that contains the necessary components of the final tablet in solution or suspension. The fast drying at low temperatures (below the glass transition temperature) will intentionally favour the amorphous form of the API/polymer mixture. In other cases, the requirement may be completely different; for example powders for inhalation must have a small aerodynamic size, resulting from the small geometric size and low density.

In short, spray drying is a very versatile lenient drying process that turns a liquid into a powder in a single process step at any scale with particle engineering possibilities that makes the technology worth considering even when drying is not otherwise required. Spray dryers can be built for operation with a wide range of (flammable) solvents as well as water, for congealing of melts, for contained processing of potent compounds, for aseptic processing and for agglomeration with integrated fluid beds and more.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
23%
Oversee medical treatment of patients in the US.
14%
Provide treatment for patients globally.
7%
All of the above.
47%
No government involvement in patient treatment or drug development.
9%
Jim Miller Outsourcing Outlook Jim MillerOutside Looking In
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerAdvances in Large-Scale Heterocyclic Synthesis
Jill Wechsler Regulatory Watch Jill Wechsler New Era for Generic Drugs
Sean Milmo European Regulatory WatchSean MilmoTackling Drug Shortages
New Congress to Tackle Health Reform, Biomedical Innovation, Tax Policy
Combination Products Challenge Biopharma Manufacturers
Seven Steps to Solving Tabletting and Tooling ProblemsStep 1: Clean
Legislators Urge Added Incentives for Ebola Drug Development
FDA Reorganization to Promote Drug Quality
Source: Pharmaceutical Technology Europe,
Click here