Manufacturing High-Potency Drugs Using Isolators - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Manufacturing High-Potency Drugs Using Isolators
The author discusses the key issues to consider when using isolators such as containment, protection of personnel, the efficiency of biodecontamination cycles, sterility assurance levels, barriers and their integrity, and environmental impact.


Pharmaceutical Technology


Risks in high-potency manufacturing

The use of a production line for manufacturing injectable, high-potency drugs in asepsis has risks. It is important to determine the risk levels of the critical aspects of the processing. The principal areas that should be taken into consideration when evaluating risk areas and modalities to control are as follows:

  • Management of chemical contamination
  • Management of cross-contamination
  • Management of aseptic processing
  • Management of the environmental impact
  • Comparison of different aseptic techniques used in manufacturing high-potency drugs.


Isolators (ALL FIGURES AND IMAGES ARE COURTESY OF THE AUTHOR.)
Isolators are an up-to-date and suitable solution for manufacturing injectable high-potency drugs as they guarantee elevated risk control. Isolators have two unique features that make them suited to this type of manufacturing: containment of contamination, particularly airborne contamination, and protection of personnel. These features avoid dispersion of high active material to the environment and guarantee the protection of operators to exposure from these materials.

Management of chemical contamination

The intermediate phases of the production process do not pose significant risk because the liquid product is confined inside the isolators or the distributor system (tanks, transfer tubes, and needles). From a containment perspective, it is much easier to manage liquid solutions than powder because of the following:

  • Liquids have more limited characteristics of dispersion and diffusion
  • Solutions are significantly more diluted than an active principle in powder
  • The principal risks to diffuse contamination are tied to dispersion in air and are present when liquids are in an aerosol phase.

The risky points of the production process are:

  • Preparation of the solution (i.e., the handling of high-active powders)
  • Product vials (i.e., the potential that a solution drops on the surface of sealed vials or vials break inside the freeze-dryer)
  • Washing of soiled process components (e.g., tanks, tubes, needles, and the freeze-dryer)
  • Transfer of various materials potentially contaminated on their surface.

The approaches to mitigate risk in each of these areas are detailed below.

Preparation of the solution. Adoption of isolators that operate with negative-pressure conditions and the integrity control of the isolators, particularly the gloves, shield operators from exposure to powders. The direct transfer of the powders to the predissolution tank, integrated in the isolator, avoids any risk of environmental dispersion. The cleaning of the closed isolator and the gathering of washing water in such a tank guarantee that the product of manufacturing remains confined, in liquid form, inside the tank. The periodical substitution of the filters, mainly exhaust ones, is executed by a trained staff, which is aware of the risks, and through a system of high containment (i.e., bag-in/bag-out).

Product vials. The last phase of the production process involves the external washing and drying of the sealed vials, which eliminate eventual traces of contamination by the product solution. The unloading of the vials from the freeze-dryer is another extremely risky point for the operators' exposure to the powder because the product is turning to its solid state. Because of the high incidence of vials breaking in the freeze-dryer, this phase is conducted within isolators both during loading and unloading. These operations further use an automatic system (i.e., pusher) and an adequate condition of loading (i.e., "pizza door"), which noticeably reduce human intervention during the process and favor the maintenance of aseptic conditions.

Washing of soiled process components. The cleaning procedures are mainly handled automatically. Where manual intervention is necessary, however, gloves are used. All manual washing activities are conducted on soiled solution components and never on powder ones.

Transfer of various materials. Because of previous handling (e.g., the supplier's container that holds the API, the container holding the API that is returned from production to the warehouse, and samples of material), all materials potentially contaminated by traces of high-active powders on their surfaces are handled with protective gloves and individual protective equipment such as masks and glasses. As a precautionary measure, all containers are wrapped in new plastic covers that collect traces of powder and avoid dispersion into the environment. All critical manipulations are performed under the safety hood or inside the isolators by trained personnel who are aware of and trained to control the risk.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
26%
Oversee medical treatment of patients in the US.
13%
Provide treatment for patients globally.
11%
All of the above.
39%
No government involvement in patient treatment or drug development.
11%
Jim Miller Outsourcing Outlook Jim MillerCMO Industry Thins Out
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerFluorination Remains Key Challenge in API Synthesis
Marilyn E. Morris Guest EditorialMarilyn E. MorrisBolstering Graduate Education and Research Programs
Jill Wechsler Regulatory Watch Jill Wechsler Biopharma Manufacturers Respond to Ebola Crisis
Sean Milmo European Regulatory WatchSean MilmoHarmonizing Marketing Approval of Generic Drugs in Europe
FDA Reorganization to Promote Drug Quality
FDA Readies Quality Metrics Measures
New FDA Team to Spur Modern Drug Manufacturing
From Generics to Supergenerics
CMOs and the Track-and-Trace Race: Are You Engaged Yet?
Source: Pharmaceutical Technology,
Click here