Melt Extrusion: Shaping Drug Delivery in the 21st Century - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Melt Extrusion: Shaping Drug Delivery in the 21st Century
The authors provde a review of melt extrusion's evolution and applications in the pharmaceutical industry. This article is part of a special Drug Delivery issue.


Pharmaceutical Technology
pp. s30-s37


Table II: Comparison of melt-granulated systems with conventional dry-granulation systems. Adapted from Kowalski et al. (Ref. 25).
Polymer combinations have been shown in numerous studies to yield amorphous solid dispersions while providing enhanced dissolution rates that led to improved oral bioavailability. There are, however, some examples where increasing the dissolution rate failed to substantially improve oral bioavailability. In a series of studies using itraconazole as the model compound, dissolution rates were improved in vitro (see Figure 2) but failed to provide a substantial improvement for oral bioavailability (see Table I) (14). Subsequent research has shown that the oral bioavailability of itraconazole is associated with an increase in metastable solubility and the ability to maintain supersaturation. Through the combination of poorly soluble drugs with concentration enhancing polymers to prepare amorphous solid dispersions, substantial increases in oral bioavailability can be achieved. Such strategies have shown benefits not just in academic settings but also in industrial applications.

As part of a Pfizer-Bend Research collaboration, Curatolo et al. studied the utility of 41 materials for the concentration enhancing benefits provided to nine proprietary and model drug substances (15). Their results demonstrated broad effectiveness of hypromellose acetate succinate (HPMCAS) to provide superior concentration enhancing behavior. Similar concentration enhancing behavior of HPMCAS has also been demonstrated using hot melt extrusion and the excellent melt properties of the polymer make it an appropriate material for use as a carrier in melt extrusion. HPMCAS, however, is not a universal solution to solubility enhancement. Other commonly used pharmaceutical polymers such as Kollidon VA 64 (BASF, Florham Park, NJ), Eudragit L100-55, and Eudragit E PO (Evonik, Parsiappany, NJ) have been shown to provide application for bioavailability enhancement.

With regard to selecting a processing technology for oral bioavailability enhancement, the literature shows that the technology used contributes to the observed dissolution rate of a solid dispersion. Patterson et al., showed in a comparative study that the distribution obtained by melt extrusion was more homogeneous than that obtained by spray drying, which exhibited some drug rich regions within the matrix (16).

There are some perceived limitations to using melt extrusion, specifically with regard to elevated-temperature processing. Although melt extrusion may not be an obvious choice for the production of extremely thermally-labile drug-substance solid dispersions, it has shown significant utility with high melting point compounds. Literature reports have shown the ability to process at temperatures almost 50 C below drug substance melting points and still achieve amorphous material with a drug loading of more than 30% (17). Additionally, the development of analytical technologies to characterize pharmaceutical polymer stability has further improved control over the processing variables. By developing an understanding of processing variable impact on polymer stability, one can more appropriately control the manufacturing process to ensure appropriate critical product attributes. Through careful consideration of critical processing parameters during melt extrusion, it is possible to cover a similar range of molecular properties while also yielding potential improvements in solid-dispersion attributes by reducing the number of manufacturing phases.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
28%
Oversee medical treatment of patients in the US.
12%
Provide treatment for patients globally.
9%
All of the above.
45%
No government involvement in patient treatment or drug development.
7%
Jim Miller Outsourcing Outlook Jim MillerCMO Industry Thins Out
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerFluorination Remains Key Challenge in API Synthesis
Marilyn E. Morris Guest EditorialMarilyn E. MorrisBolstering Graduate Education and Research Programs
Jill Wechsler Regulatory Watch Jill Wechsler Biopharma Manufacturers Respond to Ebola Crisis
Sean Milmo European Regulatory WatchSean MilmoHarmonizing Marketing Approval of Generic Drugs in Europe
Seven Steps to Solving Tabletting and Tooling ProblemsStep 1: Clean
Legislators Urge Added Incentives for Ebola Drug Development
FDA Reorganization to Promote Drug Quality
FDA Readies Quality Metrics Measures
New FDA Team to Spur Modern Drug Manufacturing
Source: Pharmaceutical Technology,
Click here