What advantages does ultra high performance liquid chromatography (UHPLC) offer over high performance liquid chromatography
(HPLC) for excipient/formulation characterisation?
The separation and determination of excipients and the characterisation of formulations are challenging processes because
of the complexity and diversity of both the analytes and the sample matrix. Ultra high performance liquid chromatography (UHPLC)
offers several advantages over high performance liquid chromatography (HPLC) for these applications. In particular it provides
a good combination of speed and resolution; for example, HPLC separations of 15 or 20 min can be conducted in a couple of
minutes without compromising resolution.
Using UHPLC systems in combination with columns packed with sub-2 Ám particle diameters, it is possible to make use of increased
column efficiencies (i.e., the number of plates per unit of length of column) and, therefore, improve the resolution of the
separations in these complex systems as the resolution increases proportionally to the square root of the number of plates.
An added advantage of working with UHPLC for excipient/formulation characterisation is the consequent increase in sensitivity
per volume of sample injected.
UHPLC is also beneficial for impurity analysis; it improves chromatographic resolution while shortening analytical run times,
with a consequent reduction in solvent consumption. In one example, the time required for an assay (analysis of simvastatin tablets) was reduced from 15 min using HPLC to 1 min with UHPLC, significantly increasing
throughput and generating savings of more than $35000 per year relating to solvent consumption and disposal.1 Also, as described above, there are advantages in using UHPLC with sub-2 Ám particle packed columns for separations; the
amount of sample needed per injection decreases significantly (proportionally to the ratio of the squares of the column diameters
and the ratio of the column lengths) compared with the amount normally used in HPLC with columns packed with 2 or 5 Ám particle
diameters; for example, a 10 ÁL injection needed in a 25 cm, 4.6 mm I.D column packed with 5 Ám particles can be reduced to
less than 1 ÁL when employing a 10 cm, 2.1 mm column packed with sub-2 Ám particles. This can be a crucial advantage in cases
where the amount of samples is limited.
What is the role of UHPLC in product quality control?
In quality control, UHPLC provides shorter analysis times, reduced operating costs, and increased sensitivity and separation
efficiencies compared with HPLC.1 UHPLC significantly extends the analytical capabilities of HPLC for product quality control by carrying out separations
more quickly and reducing the amount of solvent required for determinations. Overall, this reduces the cost associated per