Multiunit Particulate Systems: A Current Drug-Delivery Technology - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Multiunit Particulate Systems: A Current Drug-Delivery Technology
The current review describes the role and selection of excipients, pellet core, coating materials, and compression with various cushioning agents.


Pharmaceutical Technology
Volume 35, Issue 7, pp. 60-66

Thickness of polymer coating. The amount of coating affects how much compaction can modify it. Applying a thick polymeric coating to the surface of pellets imparts good elasticity and crushing strength to them (22). Damage to the coated pellets thus can be minimized during compression by applying a thick, rather than thin, coating of polymer solution (21–22). Bodmeier observed increased elastic and plastic deformation upon application of thick coating (5). The thickness of applied coatings provides good resistance to frictional forces, thus showing a direct dependence of cracks and elasticity on the film. To prevent the coatings from rupturing during compaction, the coating should have good elasticity and flexibility and be able to undergo structural changes and adapt to the deformation process (16, 22, 40, 41).

Plasticizer. Plasticizers are added to polymeric dispersions, especially to water-dispersions, to lower their glass-transition temperature and expedite the coalescence of the distinct polymer particles in the dispersion. Thus, coalescence of polymer particles directly relies on the time and temperature of coating and postcoating processes. Onions proposed a two-stage theory for the process of coalescence of aqueous polymeric dispersions.

The first stage includes the evaporation of the aqueous layer and the formation of a dry, transparent, apparently continuous film on the surface of the coated material. The coalescence of distinct polymer particles is completed gradually in the second stage. The water in the interstitial spaces starts evaporating slowly, bringing the separate particles close to each other and finally fusing the particles to form a strong and continuous film on the surface of the coated material (42–43). Further studies revealed that the amount of plasticizer did not influence drug release from compacted reservoir pellets (44). The flexibility of the aqueous-based coatings was improved by adding plasticizers, but Aulton observed that plasticizers led to a reduction in tensile strength (45). Felton proposed that increasing plasticizer content would increase the tensile strength of film-coated beads. The increased degree of plasticization of the polymer made the film more elastic and allowed it to withstand the deformation process during compression (46).

Conclusion

With its promising controlled-release mechanism for oral delivery, MUPS will be a focus of future research and development. The selection of excipients plays a key role in the success of MUPS. A thorough understanding of the factors that affect the performance of MUPS helps the formulator tailor the drug-release profiles. MUPS may soon become one of the most popular oral controlled-release systems.

Mitesh D. Phale* is a scientist and Abhijit V. Gothoskar is a global technical manager, both at Divakar Chemicals, 203–204, Sant Bhavan, Sharma Industrial Estate, Walbhat Rd., Goregaon–East, Mumbai 400 063, Maharashtra, India,
.

*To whom all correspondence should be addressed.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
Which of the following business challenge poses the greatest threat to your company?
Building a sustainable pipeline of products
Attracting a skilled workforce
Obtaining/maintaining adequate financing
Regulatory compliance
Building a sustainable pipeline of products
24%
Attracting a skilled workforce
30%
Obtaining/maintaining adequate financing
15%
Regulatory compliance
30%
View Results
Eric Langer Outsourcing Outlook Eric LangerBiopharma Outsourcing Activities Update
Cynthia Challener, PhD Ingredients Insider Cynthia Challener, PhDAppropriate Process Design Critical for Commercial Manufacture of Highly Potent APIs
Jill Wechsler Regulatory Watch Jill Wechsler FDA and Manufacturers Seek a More Secure Drug Supply Chain
Sean Milmo European Regulatory WatcchSean MilmoQuality by Design?Bridging the Gap between Concept and Implementation
Medicare Payment Data Raises Questions About Drug Costs
FDA Wants You!
A New Strategy to Tackle Antibiotic Resistance
Drug-Diagnostic Development Stymied by Payer Concerns
Obama Administration Halts Attack on Medicare Drug Plans
Source: Pharmaceutical Technology,
Click here