FDA's New Process Validation Guidance: Industry Reaction, Questions, and Challenges - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

FDA's New Process Validation Guidance: Industry Reaction, Questions, and Challenges
The authors desribe the three-stage approach to validation that is outlined in the new guidance and discuss questions surrounding implementation.


Pharmaceutical Technology
Volume 35, pp. s16-s23

FDA's 2011 Process Validation: General Principles and Practices guidance created a systemic shift in industry's approaches to validation programs. The authors describe the three-stage approach to validation that is outlined in the new guidance and discuss questions surrounding implementation.

In January 2011, FDA published its long-awaited guidance for industry on Process Validation: General Principles and Practices (1). For many in the pharmaceutical industry, the guidance created a systemic shift in the expectations of their validation programs. Although the new guidance aligns process-validation activities with the product life-cycle concept and with existing harmonized guidelines such as the Internatioanl Confernce on Harmonization's Q8(R2) Pharmaceutical Development, Q9 Quality Risk Management, and Q10 Pharmaceutical Quality System, it may have created as many questions for the industry as it has answered. In this article, the authors briefly describe the three-stage approach to validation that is outlined in the new guidance as well as implications for manufacturers regarding their current approaches to process validation. Specific emphasis is placed on questions surrounding industry implementation.

Design for assurance

The regulatory basis for process validation is contained in a number of places. Process validation is legally enforceable per the Federal Food, Drug, and Cosmetics Act. The requirements are called out in 21 CFR Parts 210 and 211 of the CGMP regulations, more specifically in Part 211.100 (a). This section is what the FDA describes as the regulatory "foundation for process validation" (1). Here, manufacturers are required to have production and process-controls procedures in place that are "designed to assure" drug products have a certain level of quality and that their products are manufactured safely, effectively, and purely.

How is that assurance to be provided, however? How can industry design to assure these qualities? One way is through direct observation; another is through prediction. Direct observation may require the destruction of the products, meaning that industry generally must use predictive methods to determine, with a certain level of confidence, that its processes and controls are designed to assure quality. Validation is the predictive method for providing this assurance.

A brief history of validation

In the 1970s, there was a series of contamination issues in large-volume parenteral bottles that, with a handful of other significant adverse events, led regulatory authorities and manufacturers to focus more on process understanding and quality assurance. The idea that finished product testing was not enough to assure product quality began to grow. Industry needed a better system to determine whether a product was "good" (2).

In the mid-1970s, FDA's Ted Byers and Bud Loftus began to promote the idea that a focus on process design and an evaluation of support processes and functions would assist in assuring that processes were under control (rather than just " testing quality into the product"). At a 1974 conference, Byers called this new predictive approach "Design for Quality" (3).

In 1987, at the request of industry, FDA published its original guideline on General Principles of Validation (4). The agency established a more formal approach to process validation and created the assertion that multiple batches need to be run. This concept eventually translated into the three-batch approach, where the successful running of three consecutive product batches represents a validated process. Herein are fundamental questions that still exist 20 years after the publication of the guidance:

  • If companies were following the guidance, why would companies continue to see processes fail during commercial manufacture?
  • Were companies really providing high degrees of assurance their processes worked reliably?
  • Did companies understand how or why running three batches proved that their processes were adequately controlled and capable of consistently providing required results?

When these questions are asked of people in the industry, the answers, in the authors' experience, are invariably, "Well, stuff happens. Things happen. Things we didn't anticipate." "Stuff happens" tends to refer to "process variation," a key term and a key reason why the 1987 guidance was updated.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
27%
Oversee medical treatment of patients in the US.
14%
Provide treatment for patients globally.
8%
All of the above.
41%
No government involvement in patient treatment or drug development.
11%
Jim Miller Outsourcing Outlook Jim MillerCMO Industry Thins Out
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerFluorination Remains Key Challenge in API Synthesis
Marilyn E. Morris Guest EditorialMarilyn E. MorrisBolstering Graduate Education and Research Programs
Jill Wechsler Regulatory Watch Jill Wechsler Biopharma Manufacturers Respond to Ebola Crisis
Sean Milmo European Regulatory WatchSean MilmoHarmonizing Marketing Approval of Generic Drugs in Europe
FDA Reorganization to Promote Drug Quality
FDA Readies Quality Metrics Measures
New FDA Team to Spur Modern Drug Manufacturing
From Generics to Supergenerics
CMOs and the Track-and-Trace Race: Are You Engaged Yet?
Source: Pharmaceutical Technology,
Click here