Pan Coating and Scale-Up: a Practical Guide Based on First Principles - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Pan Coating and Scale-Up: a Practical Guide Based on First Principles
There are various theories about how to scale up a solid dosage coating operation in a pan coater. This article provides a basic process understanding and scale-up theory based on first principles.


Pharmaceutical Technology Europe



Figure 1: Pan-coating process.
The coating process indicated in Figure 1 is an operation that comprises multiple, simultaneous ongoing exchange processes. These processes include:
  • Heat exchange between inlet process air and the coater metal body, spray droplets and tablets.
  • Mass exchange between material sprayed, and the inlet air stream, tablets and coating pan.

However, there are certain losses, such as heat loss to the metal body and the environment, that cannot be characterised easily. An approximate mass and energy balance for the operation can be calculated as below.

Equilibrium state at coating process



Heat balance:

As with any theoretical analysis, there are assumptions built into the model described above. For example:

  • Leftover material in lines are not considered.
  • Heat loss to equipment body and environment are not considered.
  • Any unrecoverable mass loss in the process is not accounted for.

These steps can be used to measure process efficiency and efficiency of the inlet air heat capacity. These actions are beneficial because the process scientist may realise that only a small fraction of heat–mass uptake capacity is being utilised. It may or may not be possible to change this. As long as the total process reconciliation is acceptable (e.g., within 2%), the process efficiency can be calculated as a ratio of tablet weight gain to the weight of solids sprayed. As the process is scaled up, the increased bed depth will generally improve coating efficiency, thus providing better opportunity for process air to exchange heat with the tablets.

Similarly, spray gun positioning, relative to the bed and to the inlet air plenum, will affect the drying process of spray droplets. In general, the greatest impact depends upon the distance of the spray gun from the bed, atomisation/fan air pressures and nozzle type/diameter.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
23%
Oversee medical treatment of patients in the US.
14%
Provide treatment for patients globally.
7%
All of the above.
47%
No government involvement in patient treatment or drug development.
9%
Jim Miller Outsourcing Outlook Jim MillerOutside Looking In
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerAdvances in Large-Scale Heterocyclic Synthesis
Jill Wechsler Regulatory Watch Jill Wechsler New Era for Generic Drugs
Sean Milmo European Regulatory WatchSean MilmoTackling Drug Shortages
New Congress to Tackle Health Reform, Biomedical Innovation, Tax Policy
Combination Products Challenge Biopharma Manufacturers
Seven Steps to Solving Tabletting and Tooling ProblemsStep 1: Clean
Legislators Urge Added Incentives for Ebola Drug Development
FDA Reorganization to Promote Drug Quality
Source: Pharmaceutical Technology Europe,
Click here