Bioavailability Enhancement: When to Use Hot-Melt Extrusion versus Spray Drying - Pharmaceutical Technology

Latest Issue
PharmTech

Latest Issue
PharmTech Europe

Bioavailability Enhancement: When to Use Hot-Melt Extrusion versus Spray Drying
Enhancing bioavailability can be achieved through hot-melt extrusion (HME) or spray drying. The drug product's API properties and stage of development are important factors to consider when deciding which technique to use. There are also considerations to be made with regard to process, time and cost. To gain perspective on these issues as well as insight into more recent advances in HME and spray drying, Pharmaceutical Technology Europe (PTE) spoke to Bend Research, an independent drug-formulation developm


Pharmaceutical Technology Europe
Volume 24, Issue 8

Advantages and disadvantages of each technique

PTE: What are the advantages and disadvantages of using HME compared with spray drying to produce the amorphous solid dispersion?

Bend Research: HME has two primary advantages. First, no solvents are used, so solvent cost and recovery are not a factor in cost-of-goods or environmental health and safety considerations. Second, the equipment footprint for HME is relatively small when the process is scaled up.

The primary disadvantage of HME is that the compound must be melted or dissolved in molten polymer at high temperatures. Thus, it is less applicable to compounds with higher melting temperatures or those that are thermally labile. This disadvantage can be partially remedied by including nonvolatile and volatile plasticisers in the formulation, which lower the temperatures required to produce an amorphous dispersion. Because an ideal amorphous dispersion is homogeneous at the molecular level, a second disadvantage is that the homogeneity of the final dispersion can be affected by process parameters such as temperature, screw configuration, screw speed and feed rates; this aspect, combined with the relatively large minimum batch size, results in cost and risk during early development.

PTE: What are the advantages and disadvantages of using spray drying compared with HME to produce the amorphous solid dispersion?

Bend Research: Spray drying offers the following advantages: it is applicable to a broader chemical space for the API and types of dispersion polymers that can be used (due to dissolution of the API in a volatile organic solvent), it does not expose the API to excessive heat during manufacture of the amorphous dispersion and it can be scaled down, requiring smaller quantities of API during formulation screening.

Spray drying has a few disadvantages as well: solvents are used and must be recovered, equipment footprints are larger, and capital and operating costs are higher. These considerations must be taken into account when designing later-stage or commercial processes and facilities, but they are not insurmountable—as evidenced by successful operation of Hovione's PSD-4 and PSD-5 spray-drying facilities and the fact that spray drying is used extensively outside of the pharmaceutical industry at large scales.


ADVERTISEMENT

blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
|Monthly
| Weekly

Survey
Which of the following business challenge poses the greatest threat to your company?
Building a sustainable pipeline of products
Attracting a skilled workforce
Obtaining/maintaining adequate financing
Regulatory compliance
Building a sustainable pipeline of products
24%
Attracting a skilled workforce
30%
Obtaining/maintaining adequate financing
15%
Regulatory compliance
30%
View Results
Eric Langer Outsourcing Outlook Eric LangerBiopharma Outsourcing Activities Update
Cynthia Challener, PhD Ingredients Insider Cynthia Challener, PhDAppropriate Process Design Critical for Commercial Manufacture of Highly Potent APIs
Jill Wechsler Regulatory Watch Jill Wechsler FDA and Manufacturers Seek a More Secure Drug Supply Chain
Sean Milmo European Regulatory WatcchSean MilmoQuality by Design?Bridging the Gap between Concept and Implementation
Medicare Payment Data Raises Questions About Drug Costs
FDA Wants You!
A New Strategy to Tackle Antibiotic Resistance
Drug-Diagnostic Development Stymied by Payer Concerns
Obama Administration Halts Attack on Medicare Drug Plans
Source: Pharmaceutical Technology Europe,
Click here