Carbon Measurement Methods for Cleaning Validation: Comparing Direct Combustion with Rinse and Swab Sampling Methods. - Pharmaceutical Technology

Latest Issue

Latest Issue
PharmTech Europe

Carbon Measurement Methods for Cleaning Validation: Comparing Direct Combustion with Rinse and Swab Sampling Methods.
Cleaning validation provides assurance that the quantity of residual substances collected from equipment surfaces are within permissible limits, helping to ensure quality control and safety in pharmaceutical manufacturing facilities. Three different cleaning validation methods for measuring the carbon in residual samples of various pharmaceutical substances were compared.

Pharmaceutical Technology Europe
Volume 24, Issue 8

TOC–LCPH, Shimadzu
The challenges of conducting cleaning validation are documented in the literature. R. Baffi et al., for example, described the diverse analytical challenges arising in validating cleaning procedures for biopharmaceutical products produced by recombinant DNA, in which a broad range of potential residual cellular components and trace levels of detergents must be quantified (1). M.A. Strege et al. described the total organic carbon (TOC) analysis of swab samples for cleaning validation of bioprocess fermentation equipment and discussed accuracy, limits of detection, limit of quantitation, linearity and precision (2). K.M. Jenkins et al. compared the advantages and disadvantages of multiple methods for cleaning validation, including high-performance liquid chromatography (HPLC), thin-layer chromatography (TLC), spectrometry, TOC and conductivity (3). A.J. Holmes et al. described the TOC method for measuring residual aspirin on aluminum, stainless steel, painted carbon steel and Plexiglas (4). The latter two authors describe the swab challenge as noted in the FDA guide to inspections of cleaning surfaces.

For cleaning validation using a TOC analyser, the following types of sampling methods are available:

  • rinse sampling
  • swab sampling with aqueous extraction
  • swab sampling with direct combustion.

These methods were compared using a total organic carbon analyser (TOC-LCPH, Shimadzu) to measure residual pharmaceutical products and their constituent substances.

Preparation of residue samples

Table I: Substances used for residue measurements.
Residue samples were prepared by applying various types of pharmaceutical products and their constituents to stainless steel pots. Compounds with varying levels of water solubility (i.e., soluble, insoluble and very insoluble) were evaluated to determine how each method performed. The water-soluble substances were dissolved in water and the water-insoluble substances were dissolved in ethanol or acetone, as shown in Table I. Solution concentrations were adjusted to 2,000 mgC/L (i.e., carbon concentration of 2000 mg/L).

The carbon contents of tranexamic acid (C8H15NO2), anhydrous caffeine (C8H10N4O2), isopropylantipyrine (C14H18N2O), and nifedipine (C17H18N2O6) were estimated by molecular formula. Carbon contents of Gentashin ointment (aminoglycoside antibiotic) and Rinderon ointment (corticosteroid) were determined with the TOC analyser by adding samples of the ointments directly into a solid-sample combustion unit (SSM-5000A, Shimadzu) since molecular formula for these compounds are unknown.

Each residue sample consisted of a 5-cm2 area on the surface of a pot to which 100 L of each solution was applied and dried. Thus, there were 200 g carbon in the sample at each application site.


blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
| Weekly

What role should the US government play in the current Ebola outbreak?
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Finance development of drugs to treat/prevent disease.
Oversee medical treatment of patients in the US.
Provide treatment for patients globally.
All of the above.
No government involvement in patient treatment or drug development.
Jim Miller Outsourcing Outlook Jim MillerOutside Looking In
Cynthia Challener, PhD Ingredients Insider Cynthia ChallenerAdvances in Large-Scale Heterocyclic Synthesis
Jill Wechsler Regulatory Watch Jill Wechsler New Era for Generic Drugs
Sean Milmo European Regulatory WatchSean MilmoTackling Drug Shortages
New Congress to Tackle Health Reform, Biomedical Innovation, Tax Policy
Combination Products Challenge Biopharma Manufacturers
Seven Steps to Solving Tabletting and Tooling ProblemsStep 1: Clean
Legislators Urge Added Incentives for Ebola Drug Development
FDA Reorganization to Promote Drug Quality
Source: Pharmaceutical Technology Europe,
Click here