|Email Newsletters from Pharmaceutical Technology and Pharmaceutical Technology Europe|
Providing the latest business, scientific, and regulatory news for the pharmaceutical and biotech industries.
News from Europe's pharmaceutical manufacturing industry coupled with upcoming events, and exclusive articles and interviews from industry experts.
Method Validation by Design to Support Formulation Development
The approach provides the required International Conference on Harmonization validation elements as well as information on interactions, measurement uncertainty, control strategy, and continuous improvement. Despite being less resource intensive than the traditional validation approach, quality is not compromised. Additionally, through judicious planning, the MVbD approach can encompass early formulation design efforts so that a wide range of formulations is taken into consideration when defining the method-validation design space.
Analytical method validation is a crucial part of formulation development. It is needed to ensure that methods provide accuracy and precision in detecting formulation differences in drug dissolution, stability, active, and impurity levels. Method validation is also key to meeting requirements of cGMP, compendia, and the International Conference on Harmonization (ICH) for testing and releasing clinical or commercial dosage forms. During early development, formulations are often changed to adapt to new preclinical and clinical data. Revalidating each of these new formulations is resource intensive and affects development timelines.
The ICH Q2 (R1) validation guidelines (1) do not provide crucial information such as how formulation changes affect method performance or what method critical validation parameters need to be monitored and controlled. An ICH approach may not provide a good understanding of a method-measurement uncertainty, which is needed to ensure that the overall process capabilities are met and that appropriate in-process controls and specifications are set. This sort of understanding is needed to meet FDA’s process validation guidelines (2). Once the product acceptance criteria are established, the influence of assay variation can be determined relative to product acceptance rates.
This article describes a method-validation-by-design (MVbD) approach to validate a method over a range of formulations. It uses both design-of-experiment (DOE) and quality-by-design (QbD) principles to define a design space that allows for formulation changes without revalidation. The approach provides the required ICH validation elements as well as information on interactions, measurement uncertainty, control strategy, and continuous improvement. This approach is less resource intensive than the traditional validation approach without compromising quality. Additionally, through judicious planning, it can encompass early formulation design efforts so that a wide range of formulations can be used to define the method-validation design space.
MVbD is not specifically addressed in ICH; however, it is supported by the principles presented in ICH Q8, 9, 10, 11 (3–6) as well as ICH Q2 (R1). There are other industry guidelines (2), publications (7–9) and presentations (10–15) that support a QbD/DOE approach for analytical method development and validation, including FDA’s 21st Century Quality Initiative, which was first presented in 2001 and later updated in 2005 (15), and the outcome from FDA’s QbD pilot.
The use of DOE is well established for determining method robustness, such as how much the mobile-phase composition, column temperature, and flow rate can vary. DOE is also well used in formulation screening. This approach broadens DOE to include method validation over a range of formulations.
The MVbD approach applies to these QbD principles:
Traditional versus DOE approaches
Traditionally, each new drug-product formulation requires validation to support clinical testing. In early development, the method is validated for linearity, accuracy, and precision. Method linearity is determined across five concentrations from 50% to 150% of the nominal (100%) concentrations. Accuracy and precision can be combined with the linearity study by doing six replicates at the 100% (nominal) concentration and three replicates at the other concentrations (50%, 75%, 125%, and 150%), which gives a total of 18 sample preparations. If there are five new formulations during development that require separate validation, a total of 90 sample preparations would be needed. This approach is resource intensive and affects project timelines. In this given example, only one formulation component is varied. As more components are varied, the workload increases proportionally.
The challenge with this approach is:
A QbD/DOE approach validates a method over a range of formulations within a defined design space. Movement within this design space does not require method revalidation with each new formulation. The DOE approach detects any excipient–API interactions and critical validation control parameters. A DOE approach is not necessarily more labor intensive than the traditional method-validation approach and additional information gained is well worth the exercise. As described, the traditional approach requires at least 90 sample preparations to validate five formulations over the course of the development. Using DOE to validate across a broader range that includes these five formulations would require only three determinations for each of the five formulations, resulting in a total of 15 sample preparations.
Steps to perform a MVbD
Figure 1 also presents the percent recovery data. The required ICH statistics can be obtained from these data. For example, Figure 2 shows linearity data along with typical linearity statistics. One key output is the root mean square error (RMSE); this parameter identifies method variability that is critical for understanding the method contribution to the overall process variability. Figure 2 also shows linearity plots of percent recovery versus the two excipient concentrations. The difference in slopes indicates interaction (i.e., a lower API recovery at a higher level of Excipient 3 concentration), possibly due to interaction of the excipient with the API. Such information is important for the formulator and method developer to consider if higher preservative levels are needed.
System linearity, quantitation limits (QL), and detection limits (DL) . To ensure the sample amount injected is within the linear range of the detector, a separate experiment can be done where the sample concentration is varied from 50% to 150% of the nominal (100%) concentration. If the potency method is also used to quantitate impurities, a wider linearity study can be performed from 100% to 0.03%. The QL and DL for the impurities can be determined by the ratio of RMSE to the slope, as described in ICH Q2 (R1).
Other MVbD outcomes
Control strategy. Figure 4 shows there is less precision (i.e., higher standard deviation and confidence values) at the higher API levels for lower amounts of Excipient 3. This lower precision is approaching the acceptance limit. Similarly, accuracy is approaching the acceptance limit as the excipient and API levels increase. These parameters need to be monitored in case the method needs to be optimized prior to transfer to the final manufacturing site(s).
The prediction profiler (bottom graphs) in Figure 5 allows the precision and bias to be varied to determine the impact on % acceptance rates. This tool can be used to justify moving to new technologies and new specifications by showing that the acceptance criteria will still be met.
Knowledge management. The lower recovery of API observed at high levels of excipient concentrations adds to the formulator’s knowledge base. If higher excipient concentrations are needed in future formulations, this aspect needs to be considered.
Regulatory strategy and potential hurdles
Since the MVbD approach is not specified in ICH regulations, not all regulatory agencies may accept this approach. Some filing strategies are briefly discussed.
The MVbD approach is statistically rigorous and scientifically defensible. It is in line with current regulatory thinking and allows movement to new formulations within the design space without revalidation. The MVbD approach provides a better understanding of the critical parameters of a method and allows greater flexibility and speed during formulation development, especially when time and resource are under constraints. Through judicious planning, MVbD can encompass early formulation design efforts so that a wide range of formulations can be used to define the method-validation design space. Once the ATP has been defined, movement to new analytical technologies and formulations is justified as long as the ATP criteria are met. This approach enables continuous improvement for efficiency and quality gains.
Control strategy, knowledge management, and measurement uncertainty are other key MVbD outputs. The DOE identifies critical validation parameters to monitor and control. The DOE also adds to the knowledge base that will help accelerate future programs. Knowing the method contribution to overall process variability enables setting appropriate in-process controls and product specifications.
Internal company alignment is needed to support a MVbD approach and define a global filing strategy. Early discussions and a presentation of a MVbD protocol to regulatory agencies can help avoid questions during regulatory submission review.
Additional studies can be done to expand the design space but not all changes may require additional studies, for example:
Some of these and other changes may be justified based on the degree of interactions seen from the DOE data. For example, a source change in lactose may be justified if there are no interactions seen at higher lactose concentrations and historical data on other formulations has shown no impact.
1. ICH, Q2 (R1) Validation of Analytical Procedures: Text and Methodology, 2005.