Methods for Identifying Out-of-Trend Results in Ongoing Stability Data - Pharmaceutical Technology

Latest Issue

Latest Issue
PharmTech Europe

Methods for Identifying Out-of-Trend Results in Ongoing Stability Data
The authors discuss three methods for identification of out-of-trend (OOT) results and further compare the z-score method and the tolerance interval in OOT analysis for stability studies.

Pharmaceutical Technology
Volume 37, Issue 6, pp. 46-51,59

Table IV: The by-time-point method limits from the tolerance interval (TI) and z-values for the corresponding TI values.
The TI was also calculated with α=0.027 and γ=0.95 for each time point. To compare the two methods for each TI value, a corresponding z-value was calculated (see Table IV).

Table V: Slope-control chart and the z-values for Batch 10.
Slope-control-chart method . The slope-control-chart method is commonly used when it is necessary to compare the results between several tested batches or between the currently tested batch and other batches from the historical database. For the purpose of this experiment, control limits were defined from the historical data and then used to test Batch 10 for the presence of OOT results. For each time point, a least-squares regression line that includes all data up to that time point was constructed. The regression line was constructed from the data of 0, 3, and 6 months, and the slope of that line was calculated. The procedure was repeated until the last tested time point of the ongoing stability study. The mean and standard deviation of the slopes for the given time intervals were calculated. The slope-control chart was then constructed (see Table V).

To identify the present OOT result, the z-score test was used to calculate the z value for the slope at each time period of Batch 10. The value of z was limited to -2 < z <+2, provided that 95.45% of the future values will enter the interval of these limits. Unlike the previous two methods for identification of OOT results, where the absolute value of the result was analyzed, in this method, the authors analyzed the values for the slope. Because small changes in the slope value cause a significant change in the regression line (and in this case it would mean the kinetics of degradation), for this model, narrower limits for the z-value were chosen.

Table VI: The slope-control chart method limits from tolerance intervals (TI) and z values for the corresponding TI values.
Additionally, the TI also was calculated from the slope values at each time interval. In this case, however, the TI was calculated with defined α=0.045 and γ=0.95, for proper comparison with the limits determined by the z-score test (7). In order to compare the two methods for each TI value, a corresponding z-value was calculated (see Table VI).


blog comments powered by Disqus
LCGC E-mail Newsletters

Subscribe: Click to learn more about the newsletter
| Weekly
| Monthly
| Weekly

Which of the following business challenge poses the greatest threat to your company?
Building a sustainable pipeline of products
Attracting a skilled workforce
Obtaining/maintaining adequate financing
Regulatory compliance
Building a sustainable pipeline of products
Attracting a skilled workforce
Obtaining/maintaining adequate financing
Regulatory compliance
View Results
Eric Langer Outsourcing Outlook Eric LangerBiopharma Outsourcing Activities Update
Cynthia Challener, PhD Ingredients Insider Cynthia Challener, PhDAppropriate Process Design Critical for Commercial Manufacture of Highly Potent APIs
Jill Wechsler Regulatory Watch Jill Wechsler FDA and Manufacturers Seek a More Secure Drug Supply Chain
Sean Milmo European Regulatory WatcchSean MilmoQuality by Design?Bridging the Gap between Concept and Implementation
Medicare Payment Data Raises Questions About Drug Costs
FDA Wants You!
A New Strategy to Tackle Antibiotic Resistance
Drug-Diagnostic Development Stymied by Payer Concerns
Obama Administration Halts Attack on Medicare Drug Plans
Source: Pharmaceutical Technology,
Click here