Biomanufacturing Outlook

Industry optimism is on the rise for 2012.
Feb 02, 2012
Volume 36, Issue 2

Eric Langer
The biopharmaceutical industry is starting 2012 with good reason for optimism. Based on preliminary results from BioPlan Associates' 9th Annual Report and Survey of Biomanufacturing, biologics manufacturers and their vendors are spending more, demanding better technologies, and expressing greater optimism than at any time in the nine years we have been assessing this industry. This year the BioPlan study finds substantial optimism, with a 37.3% of suppliers indicating that their company did either "better" or "much better" than expected in 2011. Even more relevant, 49.4% expect they will do "better" or "much better" in 2012.

Industry growth rates

Sales growth among vendors is a leading indicator of the overall performance of the bio/pharmaceutical industry because vendor sales are derived from demand for materials biologics production. If vendors are doing welll and are optimistic for the future, the bio/pharmaceutical industry is likely to follow. Supplier respondents indicated that, on average, sales growth is currently at approximately 14% annually, up from 13.0% in 2010 and 14.1% in 2007.

Biopharma's budget trends

Figure 1: Average change in biomanufacturers' budgets (2009–2012). (Figure 1 is courtesy of the author)
Budgets also are a good indicator of industry strength, and budget estimates for 2012 are up strongly in areas such as acquisition of new technologies, capital equipment, and personnel training and development. Early results from the 2012 BioPlan survey projects increases in all 12 areas, except for outsourcing (see Figure 1).

Macro trends

These overall trends are in large part resulting from global shifts that continue to drive the bio/pharmaceutical industry. Below are trends we project in 2012 specifically relating to biomanufacturing.

Internationalization. The bio/pharmaceutical industry continues to expand globally, driven by the need for prudent expansion of infrastructure, presence in new markets, and cost savings through outsourcing and offshoring, including R&D, which is traditionally performed in established high-technology regional clusters.

Biomanufacturing capacity also is increasing outside established markets. Although the US and Western Europe remain the leaders in biopharmaceutical manufacturing capacity, more than 37% of bioreactor capacity is operating in other parts of the world, including nearly 10% in Japan and the Pacific Rim, 9% in China, and more than 8% in India (2). Western product developers also are joining with local companies, such as in the local manufacture of vaccines. As more biopharmaceutical manufacturing is performed worldwide, product developers are working to standardize their products and manufacturing processes, which involves simplifying their manufacturing processes, so they can be reliably performed with consistent product produced even in facilities in lesser developed counties.

Single-use manufacturing. The trend toward more global standardized manufacturing is contributing to the adoption of single-use/disposable bioprocessing equipment, which allow the same manufacturing systems to be shipped and installed at multiple facilities. Some companies, with major vaccine manufacturers among the leaders, are starting to think more in terms of selling full manufacturing and technology packages, including all needed equipment and technology transfer, not just finished end-products, to foreign countries that are seeking local manufacture of vaccines for domestic distribution. Companies, such as GE and Biologics Modular, for example, are developing fully modular, drop-in-place-type, and equipment preinstalled or simply installed single-use bioprocessing-based facilities to address the interest for prepackaged biopharmaceutical manufacturing facilities.

lorem ipsum