|Articles|July 2, 2022
- Pharmaceutical Technology, July 2022
- Volume 46
- Issue 7
- Pages: 12
Fully Enclosed Mixing/Melting System
Author(s)Pharmaceutical Technology Editors
The ROSS Mixing/Melting and Holding Tank System can generate up to 10 psig internal pressure to produce potent and reactive materials.
The ROSS Mixing/Melting and Holding Tank System is a custom-designed machine that can produce highly potent and reactive materials at 350 °F and up to 10 psig internal pressure. The system includes a pressure-rated sealed enclosure with an operator-friendly safety glovebox and two mixers each equipped with a two-wing anchor agitator, Teflon scrapers, and jacketed six-gallon vessel.
A specially designed elevator system enables the mixers to be lowered to a maintenance position and raised to an operating height which allows for gravity feed from the melter to the holding tank. It also comes equipped with a hot oil heater and chilled water cooler.
Articles in this issue
almost 4 years ago
Getting Proactive with Pharma Packagingalmost 4 years ago
Advancing Accessibility through Point-of-Use Manufacturingalmost 4 years ago
Formulating Biologics: A Learning Curvealmost 4 years ago
Innovations in Single-Cell Proteomics Drive Advances in Disease Researchalmost 4 years ago
Automating Biopharma Manufacturingalmost 4 years ago
Challenges to Formulation Development for Highly Potent APIsalmost 4 years ago
Prefilled Syringes Show Strong Growthalmost 4 years ago
Material Management and the Impact on Extractables and Leachablesalmost 4 years ago
Trends in International Arbitration: The Fallout from COVID-19
