Breda O’Driscoll is managing director at Ultrasonic Scientific Ltd

Breda O’Driscoll

This article introduces the application of high-resolution ultrasonic spectroscopy (HR-US) for the analysis of emulsions and suspensions. The authors outline the principles of the technique and illustrate its application for analysis of the crystallization of lysozyme and the formation of a microemulsion.	

High-resolution ultrasonic spectroscopy (HR-US) is a novel approach for the analysis of materials that uses the important ability of ultrasound to probe systems non-invasively and report their constitution, microstructure and intermolecular interactions. The analytical power of ultrasound is well known through its application in medicine, for example, in the screening of unborn babies wherein the ability of the waves to pass through opaque media without causing damage is particularly important. 	

However, the use of HR-US in analysing a variety of other materials and solutions has only recently evolved to become an essential laboratory technique. This process is extremely sensitive to the molecular organization, is non-destructive, requires no markers, and can be used on non-transparent and concentrated samples, making it advantageous compared with traditional methods.	

Stable dispersions can be divided into two main groups: suspensions and emulsions. A suspension is a dispersion of fine particles of a solid within a liquid, the particles being the dispersed phase, whereas the suspending medium is the continuous phase. Apart from the mixing of an insoluble solid in a liquid, a suspension can also result from the aggregation of dissolved solids; crystallization is an example of such a process.		

Figure 1 HR-US principles of operation.  (Click to enlarge)				

An emulsion is a dispersion of one liquid in another immiscible liquid, usually in the presence of stabilizer molecules. Emulsions may be either oil droplets dispersed in water or water droplets dispersed in oil, wherein the droplet diameters are in the micron range. Fat in milk is a familiar example of an oil-in-water emulsion. The droplets are usually formed by high shear mechanical processes and stabilized against coalescence by electrostatic and/or steric barriers around the droplets provided by the stabilizers. Often, this colloidal dispersion is complex because the dispersed phase is partially solidified or because the continuous phase contains crystalline material (such as in ice cream). 	

Emulsions and suspensions have two things in common: first, they are thermodynamically unstable and second, because they are mostly optically opaque systems, they are difficult to study using optical analysis methods. Examples of pharmaceutical emulsions include lotions, liniments, creams and vitamin drops. Except for the medicinal ingredients, the base vehicles in creams, ointments and lotions are quite similar in formulation to cosmetic preparations. 	

It has been found that properly formulated pharmaceutical emulsions and dispersions provide more accurate control of the dosage. They will also furnish a method of combining many immiscible ingredients into a single, stable product, which improves the ease of application. The proper formulation and control of particle size and stability bring about the controlled release of the active ingredients. Emulsions are difficult to characterize and their behaviour is challenging to understand, however, their application is universal and they are widespread in nature. 	

There is a special class of emulsions: microemulsions. In contrast to 'normal' emulsions, they are thermodynamically stable, the droplet size in microemulsions is small (in the range 10–100 nm) and they are transparent. Microemulsions have attracted considerable interest during the years as potential drug delivery systems because of their unique properties, which include stability, ease of preparation and their ability to form spontaneously.

Analysis of microstructure and intermolecular interactions in emulsions and suspensions is a challenging task. Many traditional analytical techniques require dilution to adjust the transparency of emulsion to an acceptable range. This often affects the weak balance of intermolecular forces in emulsion and its structure. (Microemulsions suffer from similar dilution problems to emulsions, although in the case of a microemulsion formulated with a short-chain cosurfactant, dilution often leads to the total destruction of the system. Hence it is imperative that most microemulsions are measured in their concentrated state.) Another limitation is the effect of the measuring device on the structure of emulsions, which is common for rheological (viscometry and dynamic rheology) and other measurements.		

Figure 2 Monitoring lysozyme crystallization by ultrasonic spectroscopy. The inset shows the measurements during the first 5 hours of crystallization.  (Click to enlarge)	

Proteins are a class of macromolecules found universally in living creatures. Mutation of a protein or a combi-nation of proteins working together can cause diseases such as bovine spongiform encephalopathy (BSE). Subsequently, having a good understanding of proteins can help fight disease. To appreciate the function of a protein and how it performs this specific function, scientists need to understand its structure.  				

The method used to study the molecular structure of proteins is X-ray diffraction, in which the protein must be in a pure crystal form. However, because of the complex nature of proteins, and their sensitivity to their environmental conditions, it is difficult to produce good quality crystals. By running thousands of protein crystal screens that use different variables such as pH, salt concentration and temperature, scientists can narrow down the conditions that are needed to produce high quality crystals. However, this can be a long and arduous process taking months or years. The use of a real-time analytical method that can follow the crystallization reaction can speed up this process. 	

HR-US is a novel technique for non-destructive material analysis based on precision measurements of parameters of high-frequency sound waves propagating through analysed samples (Figure 1). These waves propagate through most materials, including opaque samples, and allow direct probing of intermolecular forces. HR ultrasonic spectrometers provide an unprecedented range of new analytical capabilities for research, product development, quality and process control in the biotech, pharmaceutical, food, chemical and petrochemical, and polymer industries. This rapid, inexpensive and non-destructive technique has previously established itself as a powerful tool for 				

conformational transitions in polymers and biopolymers

formation of micelles and critical micellization concentration measurements

High-resolution ultrasonic spectrometers can be used for characterization of emulsions and suspensions, and the evaluation of their stability and structure (particle size measurements). The instruments measure two parameters, ultrasonic attenuation and velocity, which are physically independent, allowing the probing of different levels of the organization of the samples to be characterized. 	

Attenuation is mainly determined by the scattering of ultrasonic waves in non-homogeneous samples (emulsions and dispersions) and fast chemical relaxation (in homogeneous mixtures). The density and the elasticity of the medium determine ultrasonic velocity. A major advantage of the ultrasonic technique is the ability to make measurements directly, in the original emulsion, without having to make dilutions. The following examples illustrate the application of the technology for analysis of the crystallization process and the formation of a microemulsion.	

Lysozyme protects the human body from bacterial infection by attacking bacterial cell walls, causing them to rupture. By varying the experimental conditions, different amounts and sizes of protein crystals can be produced. The amount of crystals as well as an assessment of their sizes and interactions is an important part of routine analysis in the pharmaceutical industry. HR-US spectrometers allow measurement as the crystal grows with time and temperature and assessment of the amount of crystals in a sample. Monitoring of crystal formation, in particular the kinetics of the reaction, is essential for the optimization of process control in the batch crystallization of pharmaceutical compounds. 		

Figure 3 Ultrasonic analysis of microstructural rearrangements and formation of microemulsion.  (Click to enlarge)				

Crystallization of lysozyme measured by HR-US is shown in Figure 2. In this measurement, 1 mL of a solution of lysozyme (40 mg/mL) in 0.1 M sodium acetate (pH 4.8) was placed into the ultrasonic cell. A precipitating agent was added to the sample and the kinetics of crystallization was followed. The spectrometer detects three stages in the crystallization process. During the first 3.4 h of the reaction, no significant change is detected. At the end of stage I the ultrasonic velocity and attenuation start to increase because of the formation of crystals. 	

This increase continues through stage II as the concentration and size of the crystals grow. The increase in ultrasonic velocity is caused by the increase in rigidity (decrease in compressibility) of the sample as a result of crystal formation. The rise in ultrasonic attenuation can be attributed to the scattering of the ultrasonic wave on the solid crystals that are formed. The scattering contribution is dependent on the ratio of crystal size and frequency (for example, the attenuation at the higher frequencies is more sensitive to the formation of small particles). Therefore, multi-frequency ultrasonic attenuation measurements allow analysis of the crystal structure and size. During stage II the ultrasonic velocity starts to decrease; in stage III the ultrasonic attenuation nearly levels off, indicating the end of crystal formation in the micron range size. However, the velocity continues to decrease, as a consequence of the sediment of a small percentage of large crystals from the system.	

This example describes the application of the technology for analysis of the formation of a microemulsion in a system consisting of pharmaceutically accepted components,

), n-propanol as a cosurfactant in a w/w ratio 6:1:1 and water.

 The measurements were performed at 20 Â°C using an HR-US spectrometer equipped with a standard 1 mL cell in the frequency range 2–20 MHz. 				

Figure 3 shows the typical dependence of ultrasonic velocity and attenuation on the concentration of water in the system (at 5 MHz). Molecular dissolving of water in the mixture at low concentrations (up to 2 wt%), which is accompanied by hydration of lipid and cosurfactant, is shown by the steady increase in ultrasonic velocity. Following this, a microstructural reorganization takes place, indicated by an additional increase in ultrasonic velocity in the range 2–6% water concentration. Formation of the microemulsion can be seen from approximately 8 wt% with ultrasonic attenuation quickly increasing, which is caused by the scattering of the ultrasonic wave on the particles. It should be noted that when compared with light scattering, good agreement above the break point was found whereas below the break point, the possible structuring of the system is not observable with the light scattering. This shows the potential of the technique in providing information previously unattainable by existing methods of analysis.	

1.	M.J. Lawrence and G.D. Rees, "Microemulsion-Based Media as Novel Drug Delivery Systems," 

2.	R. Aboofazeli and M.J. Lawrence, "Investigations into the Formation and Characterization of Phospholipid Microemulsions. I. Pseudo-Ternary Phase Diagrams of Systems Containing Water-Lecithin-Alcohol-Isopropyl Myristate,"

www.aapspharmsci.org/view.asp?art=ps020319

4.	K. Shinoda et al., "Lecithin-Based Microemulsions: Phase Behaviour and Microstructure," 

Articles

This article introduces the application of high-resolution ultrasonic spectroscopy (HR-US) for the analysis of emulsions and suspensions. The authors outline the principles of the technique and illustrate its application for analysis of the crystallization of lysozyme and the formation of a microemulsion.